A modular designed palletiser which can be adapted for both semi or fully automatic operation. The loading height can be at high or low level to allow connection to any existing conveyors.
Packs are collated on an infeed conveyor, row by row, before being transferred to the loading plate by a pneumatic pusher. When a layer is complete, the loading plate seeks the correct level and moves out above the pallet for adjustment to the correct level. Two sweeper arms, one above and one below the loading plate, fix the new layer as well as the previous load, the loading plate then retracts. All movements of the loading table are motor driven.
The machine can be fitted with different types of lifting tools including vacuum suction cups, grip/clamp and or lifting plates and most products can therefore be handled.
The gantry robot is flexible and can be equipped with automatic pallet handling. In addition to this the machine is easy to fit into an existing factory layout as the pallet magazine and Infeed/Outfeed conveyors can be placed in several different positions.
|Speed||up to 3 layers per minute, depending on laser pattern|
|Electronical connection||4l 5/400 V, 50Hz, 3 phase|
|Products handled||cases, trays, cartons etc., up to 400 mm high|
|Maximum loadind height||2400mm incl. pallet|
Gantry Robot Palletiser
|Maximum item weigt||the maximum item weight is typically 25kg but depends on the item type and quality, the lifting metod used, speed etc.|
|Capacity||up to 12 cycles per minute depending on the pallet pattern, the size, weight and quality of the items|
|Control system||S7-300 Siemens PLC|
|Electrical connection||4l 5/400 V, 50Hz, 3 phase – 25 Amp supply required|
|Air consumption||at 6 Bar up to 350 Nl/min|
|Loading heigh incl. pallet||up to 2100mm with vacuum head|
|Pallet sizes||all common sizes|
|Typical products handled||cases, shrink wrapped trays, cartons|