Trepko

 

 

TREPKO wrap-around packers are fully automatic machines which group and pack products in cases or trays formed from a flat sheet of corrugated board. The flat sheet, referred to as a ‘blank’, is folded and glued around the pre-arranged products to form the case/tray.The machine consists of flexible basic modules designed to meet the current customer requirements regarding pack types and sizes and also allows for future additions if and when they are required.

 

The machine design incorporates unique and interchangeable ‘blank’ feeders to allow different case/tray sizes to run on the same machine. This changeover procedure requires little time with all the different sized change parts easily and quickly accessible.

 

All packing takes place on one level with a maximum output speed of 20 cases per minute. The machine can also be loaded with several ‘blank' stacks for longer runs without the need for loading.

 

Box solutions

TREPKO can handle most box solutions on the same packaging machine. The company has developed almost as many box alternatives as packaging machines in order to satisfy the demand for display box, print, perforations, etc. These are based on the basic models: wrap-around, tray, tray with lid etc.

 

Optimum folding principle

TREPKO’S box folding principle provides the optimum folding sequence which results in a true rectangular box. Incorporating the straight flap edge in the construction of the box actually increases its stacking strength by approximately 15%. The unique folding principle means TREPKO are not dependent on the packaging enclosing the customer’s product resulting in less sensitive to tolerances with regards to the product and the cardboard blank.

 

Tailor–made grouping optimum

TREPKO’S design department is continuously developing new tailor-made grouping solutions to meet the wishes and requirements of our customers. These solutions allow different patterns and arrangements to be achieved, therefore improving the impact of the product at the POS.
 

 

 

Additional information: